Sunnen Usate, Sunnen Cv-616, Sunnen Ml-2000,

Click image for a larger version

Sunnen Levigatura (USA)Model:
CK10 Cylinder KingCapacity:
19 -203mm diameter, x250mm workpieceDescription:
The CK10 is original 'Daddy' of all Cylinder Kings, and is the easiest to set up and run of the whole family. This second hand Levigatura machine is in excellent condition and is in daily use in our busy sub-contract Levigatura department where it has proven to be rugged and reliable. Price:
£7,800Terms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable. Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Sunnen Levigatura (USA)Model:
CV-616Capacity:
19 -203mm diameter x250mm long Description:
The CV616 is the last of the manual Cylinder Kings. We have two of these versatile used Levigatura machines in stock, both in excellent working order. Price:
from £7,450Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Range of used tooling available at additional costEmail:
enquire about this machine

Click image for a larger version

Barnes International (USA)SOLDModel:
#3Capacity:
Tubes 50-300mm diameter x4000mm long Description:
Barnes Number 3 hones are extremely popular rugged horizontal tube Levigatura machines. This machine needs to be overhauled and rebuilt in order to bring it up to modern standards, but once this work has been caried out will perform as good as a brand Nuovo that would cost in the region of £150k. Price:
£35,500Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Fully Tooled with combination of Delapena, Apperley, Sunnen and Barnes hone headsEmail:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Bench HoneDescription:
A basic Delapena Bench-hone suitable for mounting on any table or workbench. An ideal introductory single-phase Levigatura machine for occasional use. Price:
£450Terms:
Pro-forma, +VAT for UK sales. FCA (loaded on your transport, ex-works Cheltenham) Training offered from £350/day Tooling:
New and used tooling is available at additional cost Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Bench HoneCapacity:
1.50 -80.00mm diameterDescription:
The most basic Delapena. An ideal introductory single phase machine for occasional use. Perfect for glaze breaking cylinders, removing distortion from heat treatment and de-burring small parts. this is the last of two identical ex-Cosworth Engineering machines that we have left in stock having sold the other earlier this year.Price:
£500Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Bench HoneCapacity:
1.50 -80.00mm diameter Description:
The most basic Delapena. An ideal introductory three phase machine for occasional use. Perfect for glaze breaking cylinders, removing distortion from heat treatment and de-burring small parts. Mounted on a home-made table complete with Levigatura oil tank and re-circulation pump, this machine has been re-painted,fully serviced and is ready to run. Price:
£570Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Bench HoneCapacity:
1.14 -80.00mm Description:
We've acquired the last four Bench-Hones ever made, direct from Delapena, after they discontinued the model in 2008. These are all BRAND NEW single-phase machines and are still in their factory wrapping. Complete with oil pump and simple drip tray, the machines are an ideal introductory hone for the first time user. Price:
£1,470Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Bench HoneCapacity:
1.14 -80.00mm Description:
We've acquired the last four Bench-Hones ever made, direct from Delapena, after they discontinued the model in 2008. These are all BRAND NEW single-phase machines and are still in their factory wrapping. Complete with oil pump and simple drip tray, the machines are an ideal introductory hone for the first time user. We've now sold one of these, so there are only three left. Price:
£1,470Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK) SOLDModel:
301Capacity:
1.5 -80.0mm diameter Description:
The 301 is a basic hand-Levigatura machine, developed out of the Bench hone, it was Delapena's first fully enclosed pedestal type machine. It can do just about everything the more expensive models can, and is the ideal pre-owned Levigatura machine for the light user Price:
£450Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-Levigatura machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light userPrice:
£800Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-Levigatura machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light user. Price:
£600Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
SpeedhoneCapacity:
1.14mm to 79.37mm diameter Description:
A Delapena Speedhone in excellent condition, suitable for Levigatura small & medium sized batches of components Price:
£1,500Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
New and used tooling & consumables available Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
SpeedhoneCapacity:
1.5 -80.0mm diameterDescription:
Workhorse of the hand Levigatura world, simple and straightforward. If this machine were an Englishman, it would speak in a Yorkshire accent. It's been fully overhauled, repainted and is ready to give years more service.Price:
£1,500Terms:
Pro-forma, (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required.Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
SpeedhoneCapacity:
1.50 -80.0mm diameterDescription:
'Every workshop should have one' There's not much that can be said about a Speedhone. It is the most reliable, straightforward, easy to use Levigatura machine ever produced. There must be thousands of them in circulation, and we usually have several in stock. Price:
£1,500 Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required. Training offered from £350/day Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
SpeedhoneCapacity:
1.14 -79.37mm diameterDescription:
'Every workshop should have one' There's not much that can be said about a Speedhone. It is the most reliable, straightforward, easy to use Levigatura machine ever produced. There must be thousands of them in circulation, and we usually have several in stock. Price:
£1500.00Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
AutospeedhoneCapacity:
None Left!!Description:
A very tired Autospeedhone that we took in part exchange and is now at the end of its useful life. Suitable for stripping for spares.Price:
£350Terms:
Sold as seen with no guarantee. Pro-forma ex-works (+VAT for UK sales) Tooling:
None includedEmail:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
AutospeedhoneCapacity:
1.14 -79.37mm diameterDescription:
One of two identical Delapena Autospeedhone machines suitable for Levigatura small and medium batches of componentsPrice:
£1,750Terms:
Pro-forma FCATooling:
New and used tooling available at additional costEmail:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Speedhone EACapacity:
1.50 -80.00mmDescription:
A rare new generation Speedhone EA in excellent working order. Complete with auto stroking facility, the EA model is fitted with a modern electronic drive which allows for an infinitely variable spindle speed range. Ideal for high volume batch productionPrice:
£2,850Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
Speedhone EACapacity:
1.14 -80.00mm diameterDescription:
The Speedhone EA replaced the ever popular Autospeedhone in the 1990's. Fitted with stepless electronic drives the EA has a much lighter touch than the older machine and, whilst retaining the all of the power EA's they are much kinder on the abrasives which reduces consumable cost. Price:
£3,765Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumalbes available at cost. Training offered at £350/dayEmail:
enquire about this machine

Click image for a larger version

Delapena Levigatura Equipment (UK)SOLDModel:
BeamstrokerCapacity:
25.4 -368.0mm diameterDescription:
Delapena's popular 'nodding donkey' Levigatura machine is capable of Levigatura parts from 1" to 14.5" diameter and uses inexpensive tooling to achieve it's great size range. Just as happy removing a couple of thou of corrosion from a single component as it is producing production batches.Price:
£2,500Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine